
For three years the answer to “what should my first 3D printer be?” has been one word. Bambu Lab’s A1 and A1 Mini topped almost every list I read this week, and many of those lists look suspiciously alike. But 2026 has been a strange year for that answer. Rivals have copied the formula closely enough that Tom’s Hardware’s reviewer called one of them “suspiciously” like an A1, Bambu has picked a few public fights, and the prices have shifted. So I wanted to ask the question again, properly, and compare printers that really are comparable.
What a beginner actually needs
Spec sheets will not tell a first-time buyer much, because most current printers claim similar speeds. The things that decide whether someone is still printing six months later are boring ones:
- How much goes wrong in the first week, and how easy it is to fix.
- Whether a huge pool of tutorials, profiles and answers exists for that exact printer.
- Whether the manufacturer’s support and returns policy is any good if you get a bad unit.
- What colour printing costs in wasted filament, not just in purchase price.
- Whether you are comfortable with the company’s software and cloud rules.
By those measures Bambu built its reputation, and the question is whether the gap has closed.
Class one: open-frame, four-colour bed-slingers
This is the A1’s home turf, and the most direct comparison. Three machines share the same basic formula, a roughly 256 to 260 mm cube, 500 to 600 mm/s claimed speeds, automatic calibration and a four-colour option.
| Printer | Build volume | Multicolour system | UK price (four-colour version) | US price |
|---|---|---|---|---|
| Bambu Lab A1 Combo | 256 mm cube | AMS Lite, external, open spools | £289 in Bambu’s sale to 1 December (£189 without AMS Lite) | $359 sale (printer alone $259) |
| Creality SparkX i7 Color Combo | 260 × 260 × 255 mm | CFS Lite, external, enclosed with desiccant | £339 on Creality UK, about £319 elsewhere | $349 |
| Anycubic Kobra X | 260 mm cube | ACE Gen 2, built into the toolhead | Around £239 to £259 at recent UK promotional prices | $299 in Black Friday, $279 at launch |
The first surprise: the A1 Combo is no longer the cheapest way into four-colour printing. On the numbers I found, the Kobra X undercuts it in both the UK and the US, and the i7 costs a little more.
What the independent testing says
- Colour swaps. Tom’s Hardware ran the Kobra X head to head with an A1. It averaged 35 seconds per swap from cut to purge against 90 seconds or more for the A1. On a four-colour castle with 776 swaps, the Kobra X took 13 hours 10 minutes and 150 g of purge, and the A1 took 23 hours 8 minutes and 229 g, at default settings, for a model weighing 31.74 g. Anycubic’s design cuts the filament 10 mm from the nozzle, which is why swaps are faster. Purge can be tuned on either, but the gap is large.
- The i7 is the wasteful one at defaults. Tom’s Hardware’s calibration castle produced 488.85 g of purge for a 31.59 g model at default settings on the i7, which is over half a spool. A four-printer comparison summarised by Makers101 found the Kobra X wasted 22 to 32% less than the i7 on two complex models. Creality claims about 50% less waste than a typical system, which independent tests did not bear out at defaults.
- Spool handling. Both rivals take odd spools, cardboard reels and small samples, where the AMS Lite is fussier. Tom’s Hardware gave the i7 its beginner top pick for this and its quietness.
- Monitoring. Both rivals ship an AI camera with spaghetti detection. The A1 has sensor-based checks, including tangle, nozzle clumping, build plate and air printing detection, but no camera-based spaghetti detection. Independent tests found the i7’s AI detection unreliable in at least one deliberate failure test, so I would treat it as a bonus.
- Print quality. I found no credible test where any of the three printed badly out of the box. The differences are in speed, waste and handling, not first-layer quality.
Where the A1 still leads
Everyone who tested the rivals says the same thing in one form or another. Tom’s Hardware’s Kobra X verdict says that if you want a more mature ecosystem you may still lean towards the A1. Domechy, after months with an i7, says Bambu’s app and model library are ahead, and Makers101 says to pick the A1 if you want the most proven path. FauxHammer, which gave the i7 two stars out of five on an early unit, said it would pick a Kobra X or a more reliable A1.
That “more reliable” point is the one I think matters most. Newer printers show more unit-to-unit variation. Makers101’s roundup of i7 owner reports found some with over a thousand trouble-free hours and others with dead fans or slow support. A commenter under Tom’s Hardware’s Kobra X review described breaking a retention clip and getting a replacement hotend shipped from China after a couple of weeks, which is one anecdote and not a pattern, but it shows what a bad day with a challenger brand can look like. The A1 has its own history, including an early 2024 recall that Domechy ties to the bed cable, and Bambu offered a refund and voucher or replacement parts. Even so, two-plus years of owners finding and sharing fixes is worth a lot to a nervous newcomer.
Class two: enclosed CoreXY
For people who want an enclosure, for ABS or ASA, or just to keep noise and fumes down, the comparison changes. I covered why in my post on enclosed printers.
| Printer | Notes | Price |
|---|---|---|
| Bambu Lab P2S Combo (with AMS 2 Pro) | 256 mm cube, 600 mm/s, 5-inch touchscreen, AI failure detection, AMS 2 Pro with drying. Passive enclosure | £619 in the latest UK listing I found (was £699). About $649 in the US Black Friday sale, with the printer alone at $449 |
| Elegoo Centauri Carbon 2 Combo | 256 mm cube, 500 mm/s, 350 °C nozzle, CANVAS four-colour system, enclosed. Needs some assembly | £329 in a recent UK deal (was £398). $369 in the US Black Friday sale, $449 list |
| Prusa CORE One+ (kit) | 250 × 220 × 270 mm, active chamber heating up to 55 °C, open-source firmware, local control without an account. Multicolour via MMU3 and other options | $999 for the kit in early November, with the assembled printer higher. I did not check UK pricing |
Here the price gap is hard to ignore. The Centauri Carbon 2 Combo is roughly half the UK price of the P2S Combo, and Hackster’s reviewer said its print quality is on par with Bambu and any other competent CoreXY. TechRadar rated its value highly and noted that it now has competition. What you give up is polish: it needs some assembly, the ecosystem is younger, and the P2S has the AMS 2 Pro’s drying and Bambu’s app. Prusa wins on openness, repairability and European support, but costs a lot more, and its multicolour story is less seamless than an AMS.
My opinion: if I were advising a first-time buyer who wanted an enclosure and a budget under £400, I would not tell them to stretch to the P2S Combo without at least considering the Elegoo.
The elephant in the room: Bambu’s cloud and open source disputes
You cannot write this post without it. In January 2025 Bambu announced firmware that adds authorisation for key printer operations, later accompanied by Bambu Connect for third-party software and an optional local Developer Mode. Then in April and May 2026 Bambu pressured a solo developer into taking down an OrcaSlicer fork that restored cloud printing without Bambu Connect. All3DP’s reporting says Bambu’s 7 May blog post accused the fork of impersonating its official client. Louis Rossmann pledged $10,000 to help with a legal defence, and he and GamersNexus rehosted the fork. On 18 May the Software Freedom Conservancy published a statement alleging two AGPLv3 violations: bundling a proprietary networking library without releasing its source, and the threats against the developer. Notebookcheck reports that Bambu then backed off, saying it regretted that its reference to terms of service and a potential cease-and-desist came across as a legal threat. The Conservancy launched a project it calls “baltobu” with a $250,007 fundraising goal.
Jeff Geerling’s reaction on 12 May is a good example of how this played out among influential owners. He still uses his P1S, but he has blocked it from the internet, stopped updating the firmware, put it in Developer Mode and replaced Bambu Studio with OrcaSlicer. He concluded that spending a bit more on another company’s printer might be the better play. Reddit had a thread that month titled “My first 3D printer was from Bambu Lab. My next one won’t be”, with about 130 comments, which tells you the sentiment is real but not that it is universal. Many other posters in the threads I looked at said they still value how well the printers just work.
How much should a beginner weigh this? My view is that it depends, and it is more about values than about printing results.
- It matters if you want to run your own tooling, keep prints off a vendor’s servers, or buy hardware you expect to control for a decade. I lean this way, which is why I like the idea of running Spoolman and, eventually, trying Bambuddy. It is also why I keep an eye on the printers that expose a local interface.
- It matters less if you want to download a model, press print and never think about firmware. Most beginners will never touch Developer Mode, and Bambu’s printers still work well for them. A number of the owners I read said exactly that, and I agree.
- It is not a reason to avoid the A1 by itself, but it is a fair reason to look at alternatives that are open or local-first, which is not a case Bambu can win with polish.
How much should you trust the recommendations?
I noticed three things while researching this, and they apply to my post as well.
- Most “best beginner printer” lists are affiliate content. Many carry the same ranking, A1 Mini first, with near-identical wording. That is an echo, not independent confirmation. Tom’s Hardware is a more useful signal, because its beginner guide, updated in June, put the SparkX i7 first and the A1 Mini second for kids and teens, with the Centauri Carbon as its teen pick, and that is a reviewer taking a position.
- Many reviews were supplied or sponsored. Domechy discloses that Creality is its founding printer partner and sent the i7 free. Aurora Tech’s Kobra X review was sponsored, with the unit supplied. All3DP’s Kobra X page says the manufacturer paid for the review and had no influence over it. Tom’s Hardware reviews units sent by manufacturers. That does not make them wrong, but it means the independent long-term evidence on the rivals is thin.
- Time is the missing variable. The A1 has had more than two years of owners finding and fixing problems. The i7 and Kobra X are less than a year old, so I would not read a 2026 review of a 2026 printer as proof of reliability.
So, is Bambu still the default?
My answer is yes, with an asterisk. It is still the default I would give a nervous beginner who wants the fewest surprises, the largest pool of help and no research homework. But it is no longer the only reasonable default, and in some classes it is no longer the best value. Here is how I would sort it now.
| If you… | I would look at | Why |
|---|---|---|
| Want the safest, best-documented first printer and do not mind Bambu’s ecosystem | A1 or A1 Mini | Two-plus years of owner fixes, MakerWorld, mature app, strong track record |
| Want the cheapest, fastest four-colour start | Anycubic Kobra X | Fastest swaps and least waste in Tom’s Hardware’s test, and the lowest price I found |
| Want a quiet machine that takes any spool | Creality SparkX i7 | Tom’s Hardware’s beginner pick, but watch purge defaults and unit variation |
| Want an enclosure on a budget | Elegoo Centauri Carbon 2 Combo | Roughly half the P2S Combo price, with print quality reviewers rate as on par |
| Want an enclosure and the smoothest ecosystem | Bambu P2S Combo | AMS 2 Pro, 5-inch screen, AI camera, ecosystem polish |
| Care most about openness, repairability and local control | Prusa CORE One+ or an open Klipper-based printer | Open firmware and no account needed, at a higher price |
| Do not need multicolour | A1 Mini (£139 in Bambu’s sale), or a cheaper rival | Colour is where rivals differ most, and it is optional |
Two more practical points. Whichever you pick, buy from somewhere with an easy return window and run a few test prints in the first fortnight. And note that Bambu’s sale runs to 1 December and others are discounting too, so it is worth checking my Black Friday roundup, plus my SparkX i7 versus A1 comparison for the detail on that pair.
My honest feeling is that Bambu’s real lead now is not hardware, since competitors have copied the formula and in places improved on it. It is the combination of reliability, community knowledge and polish that took years to build, and that is harder to copy. The risk to that lead is not a rival’s printer, it is Bambu itself: if it keeps spending goodwill on cloud and licensing disputes while rivals close the gap on quality, the default will change. For now, I would still point most nervous beginners at an A1, but I would no longer do it without mentioning the alternatives, and I think that is a healthy change for the hobby.
Where the evidence is thin
- Long-term reliability of the 2026 challengers, which is simply too early to judge.
- UK prices for several of these, which vary by seller and week. I used the latest listings I found and flagged the date.
- Independent, side-by-side noise measurements, which I could not find, so I made no noise claims.
- How many beginners actually care about the open-source and cloud issues. My view is that it is a minority, but I have no data.
Sources and further reading
- Tom’s Hardware: Anycubic Kobra X review (Hidden AMS)
- Tom’s Hardware: Creality SPARKX i7 review
- Tom’s Hardware: Best 3D printers for beginners 2026
- TechRadar: Elegoo Centauri Carbon 2 Combo review
- Hackster: The Maker’s Toolbox, Elegoo Centauri Carbon 2 review
- VoxelMatters: Elegoo Centauri Carbon 2 Combo review
- FauxHammer: SparkX i7 review
- Domechy: SPARKX i7 versus Bambu Lab A1
- Makers101: SparkX i7 guide and owner reports
- All3DP: Anycubic Kobra X review
- Jeff Geerling: Bambu Lab is abusing the open source social contract
- All3DP: Bambu Lab took down an OrcaSlicer fork
- Notebookcheck: Bambu Lab backtracks after SFC accuses it of AGPL violations
- 3D Printing Industry: Bambu Lab responds to backlash over firmware update
- Makers101: Elegoo Black Friday 2026 prices
- Makers101: Bambu Lab Black Friday 2026 prices
- Makers101: Anycubic Black Friday 2026 deals
- Bambu Lab UK store: Black Friday sale terms
- Dupple: Bambu Lab vs Prusa vs Creality prices, November 2026



