How to Tell When Your Nozzle Actually Needs Replacing
A nozzle is a genuinely cheap part — a few pounds for brass, a bit more for hardened steel —
Painting PLA or PETG: The Complete Guide
Multi-colour AMS printing and multi-part colour separation cover a lot of ground on this site, but there is a category
Bambu Lab R1 Laser Engraver & Cutter — What Do We Actually Know?
Bambu Lab has announced a new product category for the first time since the H-series brought a laser module to
Building a Live Plane Radar for the Desk — Where This Hobby Stops Being Just About Plastic
Every so often a project comes along that reminds me why I got into this hobby in the first place,
Best Alternatives to Benchy for Test Prints
Benchy has been the default test print for so long that printing one is treated almost as a rite of
Bambu Studio Support Settings, Properly Explained
Supports are one of those settings panels most people leave on Auto forever, and for a lot of prints that
Can You Polish PLA? Yes — The Actual Guide (and the Acetone Myth to Ignore)
Yes, you can absolutely polish PLA to a smooth, glossy, layer-line-free finish. The bit that trips people up before they
Bambu Lab Is Researching AI That Splits Models Into Parts — Here’s Why That’s a Bigger Deal Than It Sounds
All3DP’s Carolyn Schwaar reported on August 10, 2026 that researchers from Bambu Lab and three Chinese universities have published an
Is Adding the Laser Module to a Bambu H2D Actually Worth It?
The H2D was always the machine sitting at the top of the Bambu range that I had no immediate use
Printing Your Own Threads and Screws — My Take on Doing It Properly
All3DP published a genuinely useful guide on printing your own threads and screws — Threads & Screws: 3D Print Them
Should You Buy a Second-Hand 3D Printer? What to Actually Check
The beginner printers post touched on this from one specific angle — the A1 Mini’s build volume limitation is a
How to Add Any Texture to a 3D Print
A perfectly smooth, glossy plastic surface is not always what you want. Sometimes the more interesting result is a print