UCL’s New Lattice Structure Is Three Times Stronger — And It Changes How I Think About Infill
UCL Engineering published a piece of research on August 20, 2026 that I want to spend proper time with, because […]
guides
SolidVents: A Genuinely Useful Pattern Generator for Surfacing Prints
The exposed-infill technique covered in the texturing post uses whatever pattern happens to be sitting in the slicer’s infill library
How to Tell When Your Nozzle Actually Needs Replacing
A nozzle is a genuinely cheap part — a few pounds for brass, a bit more for hardened steel —
Painting PLA or PETG: The Complete Guide
Multi-colour AMS printing and multi-part colour separation cover a lot of ground on this site, but there is a category
Best Alternatives to Benchy for Test Prints
Benchy has been the default test print for so long that printing one is treated almost as a rite of
Bambu Studio Support Settings, Properly Explained
Supports are one of those settings panels most people leave on Auto forever, and for a lot of prints that
Can You Polish PLA? Yes — Here’s the Actual Guide (and the Acetone Myth to Ignore)
Yes, you can absolutely polish PLA to a smooth, glossy, layer-line-free finish. The bit that trips people up before they
Printing Your Own Threads and Screws — My Take on Doing It Properly
All3DP published a genuinely useful guide on printing your own threads and screws — Threads & Screws: 3D Print Them
Should You Buy a Second-Hand 3D Printer? What to Actually Check
The beginner printers post touched on this from one specific angle — the A1 Mini’s build volume limitation is a
How to Add Any Texture to a 3D Print
A perfectly smooth, glossy plastic surface is not always what you want. Sometimes the more interesting result is a print
Bambuddy Goes Deeper Than I Realised — A Proper Look
MakeUseOf’s Yadullah Abidi published a detailed hands-on piece on Bambuddy in July 2026 — This free browser tool beats Bambu
What Is Pillowing, and How Do You Actually Avoid It?
Pull a box lid or a flat-topped case off the plate and the top surface should be smooth. Instead, it