Should You Buy a Second-Hand 3D Printer? What to Actually Check
The beginner printers post touched on this from one specific angle — the A1 Mini’s build volume limitation is a
How to Add Any Texture to a 3D Print
A perfectly smooth, glossy plastic surface is not always what you want. Sometimes the more interesting result is a print
InfiMech MX Pro Update: Pricing Is In, and It’s Already Controversial
The original InfiMech MX Pro post has been the most-read thing on this site since it went up, and at
Bambuddy Goes Deeper Than I Realised — A Proper Look
MakeUseOf’s Yadullah Abidi published a detailed hands-on piece on Bambuddy in July 2026 — This free browser tool beats Bambu
What Is Pillowing, and How Do You Actually Avoid It?
Pull a box lid or a flat-topped case off the plate and the top surface should be smooth. Instead, it
The Best Sources for Free STL Files in 2026
The model repository landscape has shifted meaningfully in the past year, and if you have not been paying close attention,
What Is Heat Creep, and How Do You Actually Fix It?
A print runs perfectly for two hours and then, with no settings changed and no obvious cause, the extruder starts
Adding an Enclosure to the Bambu A1: Is It Actually Worth It?
The A1 is an open-frame bed slinger and Bambu built it that way deliberately. No enclosure, no chamber heating, no
The Sovol M1D: A Seven-Colour IDEX Toolchanger for $1,499
A new printer has generated a genuinely unusual amount of buzz for something that has not shipped yet, is not
What Is a Cold Pull? How and Why to Do One
A cold pull is one of the oldest maintenance techniques in FDM printing and one of the most underused. It
Tips for Perfect Bridging 3D Printing Settings Guide
A bridge is the one place in FDM printing where the nozzle deposits filament into thin air and expects it
Why Does Print Orientation Matter So Much?
The same STL file, printed in two different orientations on the same printer with identical settings, can produce two parts