The Best Resin Printers for Home Use in 2026
Everything on this site so far has been FDM — the A1, the A2L, filament, extrusion, all of it. Resin
editorial
Bambu Lab Is Researching AI That Splits Models Into Parts — Here’s Why That’s a Bigger Deal Than It Sounds
All3DP’s Carolyn Schwaar reported on August 10, 2026 that researchers from Bambu Lab and three Chinese universities have published an
Should You Buy a Second-Hand 3D Printer? What to Actually Check
The beginner printers post touched on this from one specific angle — the A1 Mini’s build volume limitation is a
InfiMech MX Pro Update: Pricing Is In, and It’s Already Controversial
The original InfiMech MX Pro post has been the most-read thing on this site since it went up, and at
Bambuddy Goes Deeper Than I Realised — A Proper Look
MakeUseOf’s Yadullah Abidi published a detailed hands-on piece on Bambuddy in July 2026 — This free browser tool beats Bambu
The Best Sources for Free STL Files in 2026
Updated 20 October 2026: added 3Dfindit, a free engineering CAD portal that suits a very different job from the hobby
Adding an Enclosure to the Bambu A1: Is It Actually Worth It?
The A1 is an open-frame bed slinger and Bambu built it that way deliberately. No enclosure, no chamber heating, no
What Is a Cold Pull? How and Why to Do One
A cold pull is one of the oldest maintenance techniques in FDM printing and one of the most underused. It
Tips for Perfect Bridging 3D Printing Settings Guide
A bridge is the one place in FDM printing where the nozzle deposits filament into thin air and expects it
The Legal Side of Selling Your 3D Prints — What You Actually Need to Know
All3DP published an excellent legal guide to selling 3D printed items in May 2026, written by senior editor Carolyn Schwaar
PlainMesh Fill & Split: The Browser Tool That Turns Any Coloured 3MF Into Printable Parts
The case for printing each colour separately and assembling the parts by hand — rather than running everything through the
Metal 3D Printing Filament: Two Very Different Things With the Same Name
I went into researching this post knowing roughly two things: that there is filament with metal in it, and that